Suivez vos envois

Suivez vos envois

Numero de suivi

Le numero de suivi est compose de 13 caracteres et figure dans le detail de votre commande

Goblin 500 combo yellow

SAB Goblin 500 combo yellow

More details


890,00 € tax incl.

GOB504

Availability: in stock

Customers who bought this product also bought:

 

General Specifications:
· Main rotor diameter: 1080 mm (with 470 mm blades)
· Main blade length: 425 to 500mm
· Tail rotor diameter: 226 mm
· Tail blade length: 80 mm
· Main shaft diameter: 10 mm
· Tail shaft diameter: 5 mm
· Spindle diameter: 8 mm
· Weight including electronics: 1840 g (excluding batteries).
Special feature:
· Full carbon boom
· Battery tray with button.
· Break point for landing gear and boom
· Inside carbon rod
Electronic Specifications:
· Cyclic Servos: Mid size 36mm
· Tail Servo: Standards size 40mm
· Typical speed controller: 80/100A
· Maximum motor size: 52 mm diameter, 52 mm height
· Battery compartment: 50x54x180mm
· Typical battery size:
6s3000[425 blades]
6s3300[470 blades]
6s3700[500 blades]

http://www.goblin-helicopter.com/shop/imagesdesc/Untitled-11.jpg

http://www.goblin-helicopter.com/shop/imagesdesc/page1-500_1-2.jpg

General Specifications
Electronic Specifications
 Main rotor diameter:  1136mm (with 500 mm blades)
 HPS Head (FBL Only)
• Main blade length: 470 to 500mm
• Tail rotor diameter: 226 mm
• Tail blade length: 80 mm
• Main shaft diameter: 10 mm
• Tail shaft diameter: 5 mm
• Spindle shaft diameter: 8 mm
• Gear Ratios 6.9-11 : 1
• Weight including electronics: 1900 g (excluding flight battery).
 18T motor pulley included (other pulley sizes available)
  
All pulleys are made for 6 mm motor shaft (5 mm motor shaft adapter included in kit)

Special Features:
• Full carbon fiber boom
• Quick release battery tray system
• Sacrificial breaking point for landing gear and boom
 Unique “inside the boom” tail push rod design






• Cyclic Servos: Mini size (36mm)
 
             Normal and 3D Flight: Hitec 5245 MG, Align DS510M or DS515M, Savox SH1250, Graupner DES 678 MG, MKS DS-9660A, Futaba 9650
              HARD 3D: Futaba BLS153, Graupner HBS660 HV, JR DS3717 HV, HITEC 7245 MG HV, JR DS3711 HV

• Tail Servo: Standard size (40mm)

• Typical Speed Controller: 80/100A
              Normal and 3D Flight: Kontronik Koby 90, YGE 100 LV

              HARD 3D: Kontronik Jive 100 LV, YGE 120 LV, CC Talon 90

• Motors: (Max Diameter: 52 mm, Max Height: 52 mm)
              Normal and 3D Flight: Scorpion HK-4015-1070, Quantum 4115-1200

              HARD 3D: PYRO 600-1200, Scorpion, HKIII-4020-1100/1350, Quantum 4120-1200

• Flight Battery: (Max Dimensions: 52x53x180mm)
              6S 2800/4500 mAh.
Kit Includes:

• 18T motor pulley (other pulley sizes available)
• 500 mm main blades 
• 80 mm tail blades
• 
DS-5001HV Cyclic Servo x 3pc
DS-7005HV Tail Servo x 1pc
Quantum 4120-1200KV Motor x 1pc


The following motor pulleys are available:
16T Pulley (P/N 0215-16-S) Ratio 10.33:1
 18T Pulley (P/N H0215-18-S) Ratio 9.18:1
 20T Pulley (P/N H0215-20-S) Ratio 8.26:1
 22T Pulley (P/N H0215-22-S) Ratio 7.51:1
 24T Pulley (P/N H0215-24-S) Ratio 6.91:1

17T Pulley (P/N H0215-17-S) Ratio 9.72:1
19T Pulley (P/N H0215-19-S) Ratio 8.7:1
21T Pulley (P/N H0215-21-S) Ratio 7.87:1
23T Pulley (P/N H0215-23-S) Ratio 7.19:1

    All these motor pulleys are for a 6 mm motor shaft. Each pulley includes an adapter for 5 mm motor shafts.

http://www.goblin-helicopter.com/shop/imagesdesc/keyfeas.jpg

http://www.goblin-helicopter.com/shop/imagesdesc/01.jpg
• Identical concept as Goblin 700
• Simple and effective design



• Carbon fiber boom for maximum rigidity



• HPS (High Precision Head System)
• 10mm high strength steel main shaft
• 8mm high strength steel spindle shaft
• Large tail pulleys for increased tail authority
• Dampened tail system for increased vibration tolerance

• Unique, extremely rigid transmission design
• Stiffness of the model defined by a single component
• Heat tolerant primary drive belt
• Carbon fiber tail push rod hidden inside the boom for an aesthetically pleasing, unique design


• Nylon bolt break-away system to preserve the boom during a crash


• Landing gear mounting brackets don’t require bolts to be installed. The brackets are a break point during a crash preserving frames and other important parts
http://www.goblin-helicopter.com/shop/imagesdesc/gallery/09aa.jpg
• Quick release battery tray system


• Plenty of room for electronic components

• Mini size cyclic servos
• Direct and geometrically correct servo placement
• Standard size tail servo

From Comment
2014-06-10 jean patrick s. Génial le kit.
Merci Marcel
JP
2013-11-28 Gabriel C. Superbe kit merci Marcel

Only registered user can post a new comment.

Cart  

(empty)